MICRO/SEMICONDUCTOR CLEANROOM PROJECT REFERENCES

PROJECT NAME: Duke University (Center for Integrated Engineering Medicine and Applied Sciences (CIEMAS), Durham, NC
CONTRACT VALUE: $11,900,000
CLASSIFICATION: 100
SCOPE: Construction Management
DESCRIPTION: Contracted to value engineer and construct a 10,000 sq. ft. Class 100 Research Facility for multidisciplinary research including cleanroom, MOCVD Lab, and EMI shielded research room. AdvanceTEC worked closely with the design team to value engineer the facility budget by nearly 20% to allow for progression of the facility construction. Scope of work included HVAC systems, electrical, fire alarm, TGM system, cleanroom finishes, expansion of the building management systems, and process systems.
COMPLETED: June 07

PROJECT NAME: Nitronex Corporation, Durham, NC
CONTRACT VALUE: $2,400,000
CLASSIFICATION: 100/1000
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and construct a 5000 sq. ft. Class 1000/10,000 Wafer Fab expansion, including mechanical services, architectural modifications, Toxic Gas Monitoring System, electrical upgrades and distribution, fire protection revisions, and securing of all permits. Process systems include DI water system, process gases, chilled water system, acid exhaust duct distribution, and solvent exhaust.
COMPLETED: April 07

PROJECT NAME: Air Liquide Vinci Project, Wilmington, DE
CONTRACT VALUE: $500,000
CLASSIFICATION: 100/1000
SCOPE: Design/Build Construction of Trace Metal Analysis Lab.
DESCRIPTION: Contracted to design and construct a 1000 sq. ft. Class 100/1000 cleanroom for their Research and Development facility, including architectural systems, HVAC systems, electrical systems, securing of all permits and process systems design and layout for current and future process equipment. Process systems include DI water system, process gases, and solvent exhaust.
COMPLETED: January 07

PROJECT NAME: Norfolk State University (RISE 1)
CONTRACT VALUE: $3,100,000
CLASSIFICATION: 100/1000/10,000
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and construct a 6000 sq. ft. Class 100 R&D Nanotech Facility including mechanical services, cleanroom envelope, process systems, exhaust systems, structural engineering and EMI and Vibration Isolation Systems. Process systems include DI water system, process gases, chilled water system, acid exhaust, and solvent exhaust.
COMPLETED: December 06

PROJECT NAME: Norfolk State University (Teaching Cleanroom), Norfolk, VA
CONTRACT VALUE: $250,000
CLASSIFICATION: 10,000
SCOPE: Design/Build Facility Modification
DESCRIPTION: Contracted for design and construction of a cleanroom utilized to simulate wafer fabrication production steps to train students in the proper etiquette and use of a research cleanroom facility and wafer fabrication production steps.
COMPLETED: July 06

PROJECT NAME: University of NC Chapel Hill
CONTRACT VALUE: $800,000
CLASSIFICATION: 100/10,000
SCOPE: Turn key Cleanroom Construction
DESCRIPTION: Contracted to construct a 1000 sq. ft. Class 100 Cleanroom for wafer research. Scope included mechanical services, cleanroom envelope, electrical requirements, and equipment facilitation.
COMPLETED: June 06

PROJECT NAME: SemiSouth Laboratories
CONTRACT VALUE: $3,400,000
CLASSIFICATION: 100/1000/10,000
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and construct a 6000 sq. ft. Class 100/1000/10,000 Wafer Fab, including mechanical services, structural engineering and installation of the recirc fan support deck, and equipment facilitation including securing of all permits. Process systems include DI water system, process gases, chilled water system, acid exhaust w/scrubber, and solvent exhaust.
COMPLETED: May 06

PROJECT NAME: Naval Depot Facility, Jacksonville, FL
CONTRACT VALUE: $600,000
CLASSIFICATION: 100/1000
SCOPE: Cleanroom Envelope U101 Cleanroom Upgrade
DESCRIPTION: Contracted for construction of the cleanroom including walls, floors, ceilings, and protocol management.
COMPLETED: August 05

PROJECT NAME: Honeywell FM&T, Kansas City, MO
CONTRACT VALUE: $1,900,000
CLASSIFICATION: 100
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and construct a 2000 sq. ft. Class 100 Assembly Cleanroom for mechanical parts at the Department of Energy’s site in Kansas City, MO. Scope of work includes mechanical services, cleanroom envelope, electrical requirements, structural engineering, installation of the recirculating fan support deck, and equipment facilitation.
COMPLETED: December 04

PROJECT NAME: Ziptronix Corporation, Morrisville, NC
CONTRACT VALUE: $1,700,000
CLASSIFICATION: 100/1000/10,000
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and construct a 3500 sq. ft. Class 100/1000/10,000 Wafer Fab, including mechanical services, structural engineering and installation of the recirc fan system, & eqmt facilitation including securing of all permits. Process systems include DI water system, process gases, chilled water system, AWN System, & acid & solvent exhaust systems.
COMPLETED: May 03

PROJECT NAME: Covega (formerly Quantum Photonics & Codeon Corporation), Jessup, MD
CONTRACT VALUE: $535,000
CLASSIFICATION: 10,000
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and retrofit a 3000 sq. ft. shell space to construct a Class 10,000 cleanroom, including mechanical and filtration systems retrofits, architectural finishes, and process systems expansions. Performed the work within a two (2) month time period.
COMPLETED: April 03

PROJECT NAME: Brewer Science, Rolla, MO
CONTRACT VALUE: $850,000
CLASSIFICATION: 100/1000
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and construct a 3500 sq. ft. Class 100/1000 R&D Wafer Fab, including mechanical services, cleanroom envelope, electrical requirements, structural engineering, installation of the recirculating fan support deck, and equipment facilitation including securing of all permits. Process systems include DI water system, process gases, chilled water system, and solvent exhaust.
COMPLETED: November 02

PROJECT NAME: US Navy EOD Facility, Indian Head, MD
CONTRACTED TO: Coakley Williams Construction
CONTRACT VALUE: $44,000
CLASSIFICATION: 100,000
SCOPE: Design/Build
DESCRIPTION: Completed design of the cleanroom envelope, and construction the cleanroom including walls, floors, ceilings, filtration systems.
COMPLETED: August 02

PROJECT NAME: Nitronex Corporation, Durham, NC
CONTRACT VALUE: $2,700,000
CLASSIFICATION: 1000/10,000
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and construct an 11,000 sq. ft. Class 1000/10,000 Wafer Fab, including mechanical services, structural engineering and installation of the recirc fan support deck, and equipment facilitation including securing of all permits. Process systems include DI water system, process gases, chilled water system, acid exhaust w/scrubber, and solvent exhaust. Systems are designed for the ultimate build out of 34,000 SFT of cleanroom space.
COMPLETED: June 02

PROJECT NAME: Battelle Labs, Columbus, OH
CONTRACT VALUE: $750,000
CLASSIFICATION: 100/10,000
SCOPE: Design/Assist
DESCRIPTION: Completed design of the cleanroom envelope, and construction of the cleanroom including walls, floors, ceilings, and process tool installation.
COMPLETED: March 02

PROJECT NAME: Siemens Inc. (Joint Venture with fh chase Inc.), Atlanta, GA
CONTRACT VALUE: $2,300,000
CLASSIFICATION: 10,000
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and construct a 9000 sq. ft. Class 10,000 cleanroom facility, including mechanical services, structural engineering and installation of the recirc fan support deck, and equipment facilitation including securing of all permits. Process systems include DI water system, process gases, chilled water system, Boiler, and heat exhaust.
COMPLETED: November 01

PROJECT NAME: Covega, Inc. (formerly Quantum Photonics), Jessup, MD
CONTRACT VALUE: $1,000,000
CLASSIFICATION: 100/1000/10,000
SCOPE: Design/Assist
DESCRIPTION: Contracted to assist in design engineering of the facility cleanroom, and assisted the General Contractor in securing a $6 million contract. Contracted scope includes the cleanroom envelope (walls/floors/ceilings) and structural engineering and installation of the recirc fan support system and service catwalks above the cleanroom.
COMPLETED: November 01

PROJECT NAME: Infenera (formerly Little Optics), , Annapolis Junction, MD
CONTRACT VALUE: $2,000,000
CLASSIFICATION: 100/1000/10,000
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and construct a 5000 sq. ft. Class 100/1000/10,000 Wafer Fab, including mechanical services, structural engineering and installation of the recirc fan support deck, and equipment facilitation including securing of all permits. Process systems include DI water system, process gases, chilled water system, acid exhaust w/scrubber, and solvent exhaust.
COMPLETED: June 01

PROJECT NAME: Haleos Inc. (formerly ACT Micro Devices), Blacksburg, VA
CONTRACT VALUE: $3,000,000
CLASSIFICATION: 100/1000/10,000
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and construct a 10,000 sq. ft. Class 100/1000/10,000 Wafer Fab, including building addition for mechanical services, structural engineering and installation of the recirc fan support deck, and equipment facilitation including securing of all permits. Process systems include DI water system, process gases, chilled water system, acid exhaust w/scrubber, and solvent exhaust.
COMPLETED: February 01

MISCELLANEOUS PROJECTS:
OFS Corporation- Facility Consolidation Feasibility Study and Space Programming- June 06
Brewer Science- Rolla, MO- Class 1 Mini Environment - April 04
CREE Research- Durham, NC- Chemical Distribution Study- July 03
Intersil Corporation- Palm Bay, FL- CDA Distribution Study- June 03
E.I. Dupont- Chestnut Run Site, Wilmington, DE- Cleanroom Installation- December 2000
RF Micro Devices- Several Retrofit Projects and Sustaining Work - March 00 thru August 00

NANOTECHNOLOGY CLEANROOM PROJECT REFERENCES

PROJECT NAME: Georgia Tech University Nanotechnology Research Center
CONTRACT VALUE: $2,200,000
CLASSIFICATION: 100/1000
SCOPE: Cleanroom Envelope
DESCRIPTION: Contracted for construction of the cleanroom including walls, floors, ceilings, and interstitial support system.
TO BE COMPLETE: December 07

PROJECT NAME: University of Florida Nanotechnology Research Facility
CONTRACT VALUE: $1,000,000
CLASSIFICATION: 100/1000
SCOPE: Cleanroom Envelope
DESCRIPTION: Contracted for construction of the cleanroom including walls, floors, ceilings, and interstitial support system.
TO BE COMPLETE: August 07

PROJECT NAME: Brookhaven National Laboratories Center for Functional Nanomaterials
CONTRACT VALUE: $1,200,000
CLASSIFICATION: 100/1000
SCOPE: Cleanroom Envelope
DESCRIPTION: Contracted for construction of the cleanroom including walls, floors, ceilings, and Protocol Management.
COMPLETED: January 07

PROJECT NAME: NanoOpto Corporation, Somerset, NJ
CONTRACT VALUE: $1,100,000
CLASSIFICATION: 100/1000
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and construct a 1000 sq. ft. Class 100 Nanotechnology Facility Expansion, including mechanical services, cleanroom envelope, process systems, exhaust systems, structural engineering and EMI process equipment installation. Process systems include DI water system, process gases, chilled water system, acid exhaust, and solvent exhaust.
COMPLETED: November 05

PROJECT NAME: University of South Florida, NanoTech 1
CONTRACT VALUE: $200,000
CLASSIFICATION: 100/1000
SCOPE: Cleanroom Envelope
DESCRIPTION: Contracted for construction of the cleanroom including walls, floors, ceilings, and Protocol Management.
COMPLETED: July 05

PROJECT NAME: Purdue University, Birck Nanotechnology Center
CONTRACT VALUE: $2,500,000
CLASSIFICATION: 100/1000
SCOPE: Cleanroom Envelope
DESCRIPTION: Contracted for construction of the cleanroom including walls, floors, ceilings, and Protocol Management.
COMPLETED: July 05

PROJECT NAME: West Virginia University Nano/Micro System Engineering Facility
CONTRACT VALUE: $380,000
CLASSIFICATION: 100/1000/10,000
SCOPE: Cleanroom Envelope
DESCRIPTION: Contracted for construction of the cleanroom including walls, floors, ceilings, and Protocol Management.
COMPLETED: June 05

PROJECT NAME: University of Maryland, Kim Engineering Building
CONTRACT VALUE: $1,200,000
CLASSIFICATION: 100/1000
SCOPE: Cleanroom Envelope
DESCRIPTION: Contracted for construction of the cleanroom including walls, floors, ceilings, Environmental Chambers, Process Hoods, and process tool installation.
COMPLETED: December 05

PROJECT NAME: US Navy Naval Research Laboratory, Washington, DC
CONTRACT VALUE: $1,700,000
CLASSIFICATION: 100
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and construct a 2000 sq. ft. Class 100 R&D Nanotech Facility for Sensor Research, including mechanical services, cleanroom envelope, process systems, exhaust systems, structural and EMI and Vibration Isolation Systems. Process systems include DI water system, process gases, chilled water system, acid exhaust, and solvent exhaust.
COMPLETED: May 04

PROJECT NAME: Penn State University, State College, PA
CLASSIFICATION: 100/1000
SCOPE: Consultant for design of the University’s Nanofabrication Facility Expansion, including Nano-Bio facility.
DESCRIPTION: Contracted to review the requirements for upgrading the existing facilities and constructability review.
COMPLETED: January 03

PROJECT NAME: NASA Bldg. 77 Cleanroom, Cleveland, OH
CONTRACT VALUE: $1,400,000
CLASSIFICATION: 100/1000
SCOPE: Design/Build and Construction Management
DESCRIPTION: Contracted to design and construct a 1500 sq. ft. Class 100/1000/10,000 R&D Wafer Fab, including mechanical services, cleanroom envelope, process systems, exhaust systems, structural engineering and installation of a roof mounted chiller and MUA unit., and equipment facilitation including securing of all permits. Process systems include DI water system, process gases, chilled water system, acid exhaust w/scrubber, and solvent exhaust.
COMPLETED: May 02